Skip to content
AERARECOVERY PROJECT

AERA for your device

OnePlus 15R / Ace 6T

macan

Latest nightly release

What's new.

Current build
aeraui: expose display rotation state to audio bridge aeraui: fix landscape layouts for configurable screen widths soong config: export AERA_SCREEN_W aeraui: let pages use the full screen width aeraui: add AERA_SCREEN_W for wider screens

Your first installation and future updates

A clear way to install.

Instructions for OnePlus 15R / Ace 6T (macan). Read them before starting.

Before you start

This guide is for OnePlus 15R / Ace 6T (macan). Your bootloader must already be unlocked. Use a computer with Android SDK Platform Tools installed, and read any release-specific installation notes for the build you choose.

First installation

  1. Download the AERA ZIP for OnePlus 15R / Ace 6T (macan) from this page. Keep the complete ZIP; you will install this same file inside AERA later.

  2. Open the ZIP on your computer and extract recovery.img. Leave the original ZIP intact.

  3. Connect your device to the computer and enter Bootloader Mode or Fastbootd. Open a terminal in the folder containing recovery.img.

  4. Flash the extracted recovery image:

    Terminal command
    fastboot flash recovery recovery.img
  5. Boot directly into AERA Recovery after flashing. Select Recovery Mode in the boot menu, or run:

    Terminal command
    fastboot reboot recovery
  6. Make the original AERA ZIP available in recovery, for example by copying it to internal storage or using USB OTG. In AERA, open File Manager, select that same ZIP and confirm installation. Let the installer finish successfully: this completes installation to both recovery slots.

  7. Reboot back into recovery when installation finishes.

Update AERA

Download the newer AERA ZIP for this exact device and install the complete ZIP from File Manager inside AERA. Let installation finish, then reboot recovery. You do not need to extract or flash recovery.img again for this update.

After a system update

A local update or OTA installed from Android may replace AERA with the recovery supplied by the system update. If AERA has been replaced, repeat the first-installation steps using an AERA build compatible with your updated firmware.

Keep AERA installed

Before installing a compatible system or ROM ZIP through AERA, open Preferences > Files & installation and enable Keep AERA installed, if available. This option restores the running AERA recovery to both slots after ZIP installation. It does not protect AERA from updates installed by Android's own system updater. Always follow the system or ROM package's installation requirements.

Nightly / Release history

Previous builds.

Up to four previous ZIPs per channel. Older release notes remain in the changelog archive.

Browse the complete changelog archive